The Ultimate CCNA Lab Workbook You Need To Pass The CCNA Certification Exam And Become a Successful Cisco Network Engineer

CCNA Lab Workbook

Pass The CCNA Certification Exam

CCNA Lab Workbook comes into place to help you intensify your knowledge and reinforce your hands-on experience in order to pass the CCNA certification exam. The CCNA workbook is designed to help you understand clearly all the CCNA topics, and become so confident about configuring and troubleshooting medium-sized networks in the CCNA exam and in the real life.

Develop & Improve Your Hands-on Configuration and Troubleshooting Skills

You do not need to invest thousands of dollars in a CCNA class to gain the same great hands-on experience and high quality knowledge provided in your CCNA lab workbook. In addition, CCNA lab workook will allows you to practice all the networking commands needed to pass the CCNA exam

Analyze, Configure, Test, and Troubleshoot

The CCNA Lab Workbook teaches you how to analyze a problem, configure the solution, verify and test it. Upon the completion of the 96 CCNA labs, you’ll be able to install, configure, operate, and troubleshoot medium-size routed and switched networks.

Easy To Use With GNS3 & Packet Tracer

All that you need to build your CCNA lab is a Cisco IOS image file and the latest version of GNS3 (Graphical Network Simulator), or Cisco Packet Tracer. If you do not know how to setup CCNA labs on Packet Tracer and GNS3, then just email us and we will do it for you.

Comprehensive CCNA Lab Workbook

More than 90 labs divided into 8 modules to help you understand and practice all the CCNA topics. CCNA lab workbook includes more than 250 CCNA lab tasks allowing you to build up high level of network configuration and troubleshooting skills in identifying and solving routing switching problems.

Each module contains dozens of tips and tricks that require only one commitment from you – pay attention and practice it. You’ll never get lost, or wonder what you should be reading after. It’s all logically and intuitively laid out to maximize Knowledge and minimize confusion.

Excellent Support

By investing in our CCNA lab workbook, you will benefit from our great support. Whenever you encounter issues, just contact us at support@networkexperttraining.com and we will help you as fast as we can. Once you contact us, we will try to respond within 24 hours, but normally we are much faster. Your satisfaction is our goal. Therefore by investing in our CCNA lab workbook, you will receive a high quality product and an excellent support online and offline.

Small Investment with High ROI

A high quality workbook sold for a cheap price. You will never gain the hands-on experience that this CCNA lab workbook provides you even you spend thousands of dollars in CCNA training.

What You Find In The CCNA Lab Workbook

Module 1: Basic Configuration – 2 Lab

  • Connecting to a router
  • Router basic configuration

Module 2: Switching – 26 Labs

  • Basic configuration
  • Configuring Vlans
  • Trunking
  • Trunking – advanced scenario
  • VTP server
  • VTP client
  • VTP transparent
  • VTP – advanced scenario
  • VTP pruning
  • STP algorithm
  • STP algorithm – advanced scenario
  • STP – root bridge election
  • STP timers
  • STP advanced scenario
  • STP portfast
  • STP uplinkfast
  • STP tunning
  • Etherchannel – static mode
  • Etherchannel – pagp
  • Etherchannel – lacp
  • port security – basic configuration
  • Port security – sticky mac addresses
  • Port security – protect violation mode
  • Port Security – Restrict Violation Mode
  • Port Security – Errdisable Recovery Feature
  • Intervlan Routing

Module 3: Wide Area Networks – 9 Labs

  • HDLC
  • PPP
  • PPP – advanced scenario
  • Frame Relay – inverse arp
  • Frame Relay – static mapping
  • Frame Relay – hub and spoke
  • Frame Relay – full mesh
  • Frame Relay – Partial mesh
  • Frame relay – advanced scenario

Module 4: IP Routing – 35 Labs

  • Static routing – Basic configuration 1
  • Static routing – Basic configuration 2
  • Static routing – Point-to-point interfaces
  • Static routing – Floating static routes
  • RIPv1
  • RIPv2
  • RIPv2 over frame relay
  • RIP update versions
  • RIP unicast updates
  • RIPv2 authentication
  • RIP Default route
  • RIP advanced scenario

  • OSPF Basic configuration
  • OSPF – point-to-point
  • OSPF – nonbroadcast
  • OSPF – point-to-mulltipoint
  • OSPF- point-to-mulltipoint nonbroadcast
  • OSPF – authentication
  • OSPF cost
  • OSPF timers
  • OSPF – default route
  • OSPF – advanced scenario
  • EIGRP Basic configuration
  • EIGRP unicast updates
  • EIGRP split horizon
  • EIGRP unequal load balancing
  • EIGRP default route
  • EIGRP advanced scenario
  • Summarization – Static routing
  • Summarization – RIPv2
  • Summarization – EIGRP
  • Summarization – OSPF
  • Bonus: Class A subnetting
  • Bonus: Class B subnetting
  • Bonus: Class C subnetting

Module 5: Internet Protocol Version 6 – 4 Labs

  • Basic IPv6 addressing configuration
  • RIPng
  • RIPng over frame relay
  • 6to4 tunneling

Module 6: Security – 6 Labs

  • Numbered ACLs
  • Named ACLs
  • DoS attack mitigation
  • SDM – basic configuration
  • SDM – DHCP
  • VPN – site-to-site

Module 7: Managing Cisco devices – 7 Labs

  • Backing up configuration files
  • Backing up Cisco IOS image
  • Restoring Cisco IOS image
  • Upgrading Cisco IOS image
  • Router’s Password recovery
  • CDP
  • SNMP

Module 8: IP Services – 7 Labs

  • Telnet
  • Controlling telnet access using ACLs
  • SSH – basic configuration
  • Static NAT
  • Dynamic NAT
  • PAT
  • DHCP

Our 30 Day 100% Money Back Guarantee

You have a full 30 days to try out CCNA Lab Workbook and see your hands-on skills grow day after day. If it doesn’t help you, just let us know and we’ll refund your payment — guaranteed!
  • CCNA lab workbook in PDF format. It is available immediately after the completion of
  • 96 CCNA labs divided in 8 modules and covering these topics: Basic Configuration, Switching, Wide Area Networks, IP Routing, Internet Protocol Version 6, Security, Managing Cisco devices, and IP Services.
  • World Class Support – If you have any questions or problems you can contact us and we will respond fast (usually within 24-48 hours). You can also send us your suggestions about the subjects you want us to develop labs on.
Add To Cart – Only $57